Street Fighter II (SF2, SFII)  March, 1993 / 4 Players

serial Number #108957
 

This unit is about 98% fully operational. I will try and describe as best as I can the EXACT 2% that needs work. It's being sold as-is so I will describe what needs to be done.

 

Cosmetically the best Street Fighter Pinball machine I have EVER seen (which is why I bought it originally) and I have seen about 10 (They say there were only 5,550 of these made.) at various arcade auctions over the past few years plus many on ebay while looking for various parts to restore this.

 

The playfield is in excellent condition. Cabinet complete with playfield glass, locks, keys ect...

Has all the playfield plastic, clean with almost no wear (tiny things like some small rust patches on the gate ramps)

Looks almost brand new. 80% of the light bulbs have been replaced within the past month so all light up during test. All the worn rubber replaced with Happ parts, and even the lower playfield window (only a few months old) is very clean with very minimal wear compared to almost all the units I have seen. You can clearly see the car and lower level without a problem.

 

All the artwork is intacked with no real visible flaws minus some touchup. Over half of the Coils are brand new and all work  (minus 2 which will be noted in the bad section below)

 

Unit powers up with no problem. Game was manually completed within days ago with the glass off so all the switches, optics and gates all work to play including the car crunch.

 

All the board, roms, coils, assembles ect are present. Unit is really only missing one small metal part which is listed below. Sound works great.

 

 

The display is missing two lines at the bottom. Does not effect game play (see pictures) at all and you can fully still see the scores and is just cosmetic to the eye. Barely noticeable (new displays are plug and play if you want to replace it down the road)

 

The left ball stop assembly is missing the metal shaft as noted above. It's just the metal shaft that the coil pulls down is missing. The mount and the coil are all intacked. The right one is complete and working. A simple fix with the one part.

 

One of the coin mechs is missing the micro switch to add credits if a coin is dropped in that chute. All the others work. Another simple fix.

 

The side metal has some rust. Could easily be removed with the right stuff.

 

The bottom two upkickers recently keep blowing a fuse. I was told it may just be one of the transistors on the A3 Driver board getting stuck open. May be a real simple fix. They are complete with new coils and have all the parts. Just don't have the time to find the parts and fix it myself and there are no reliable in-home service people in my area.

 

Special Features:  Street Fighter II has some interesting bells and whistles such as a flipper that rotates and kicks the ball randomly around the upper playfield. It also has a unique LOWER LEVEL underneath the main playfield. The layout on the playfield is nice with an even balance of hard and easy shots. Street Fighter 2 makes an excellent choice for enthusiasts looking for an affordably priced, modern, dot matrix game, or  for collectors that want to add another game to their collection!

 

This pinball game is based on the movie and the extremely popular video game Street Fighter. It has lots of neat toys on the playfield and theres always plenty to shoot at and modes to complete! 

Street Fighter 2 has some really great music and great sound effects, and features a ROTATING flipper that kicks the ball around on the upper playfield! Like the 80's game Haunted House, Street Fighter 2 has a
playfield and flippers underneath the main playfield! The game features superb ball flow, FOUR multi-ball modes and a FOUR BALL multi-ball! Street Fighter 2 has plenty of ramps, lots of interesting shots,
and plenty of targets to shoot at.  This game theme is really popular with kids, but is challenging enough for adults too and fits well in a home environment!

The pin is of standard (24") width. Its playfield has two ramps, standard triangular slingshots above each flipper, one inlane and one outlane on each side, and a dot-matrix display. 

The machine has five flippers, but when you first look at it you'll probably only see three: the two standard flippers and a third full-size flipper half way up the left-hand side of the playfield, facing sideways. A fourth flipper is in a mini-playfield under the main playfield, and is only activated during a Car Crunch. The fifth flipper is at the top of the right ramp, and it rotates at constant velocity whenever the right ramp is in the lowered position; you have no control of this flipper.

 

 

I am moving out of town for a job relocation within weeks. The movers are charging me by the pound. And honestly the pinball machine is the heaviest thing I own.

 

I would love to keep it but I don't want to pay the extra few hundred they want to charge me to move the unit. My loss is your gain.

 

This unit is being offered for sale for pickup only. You only need to take it down just three steps(not stair cases) to get it to street level  I will not be able to arrange shipping. I will work my best to allow day, evening or weekend
pickup depending on my work schedule.

 

But does need to be picked up ASAP after close of auction due not knowing when I have to schedule my movers.

 

Payment will be cash on Pickup. We have great feedback and have described the bad stuff as descriptive as I can. Pinball machines are getting harder and harder to come by and really only go up in value if kept in as good condition as this one is.